KBK Flexible Modular Crane

Freestanding Workstation Overhead Cranes

Series of KBK flexible modular suspension crane system contains KBK-D type monorail, KBK-LD type single girder, KBK-LS double girder, lifting weight 0.5-3 tons, have wide use range, especially suitable for modern production conveyor line.

KBK-D flexible modular monorail conveyor

KBK-D flexible modular monorail conveyor, the use of standard components, according to the user provided logistics transmission, distribution, requirements, can be combined out of a ring, bifurcation, network and other monorail conveyor line, used to meet the needs of material transport. KBK-D flexible modular monorail transmission line can supply power to the whole line. Each trolley can be electrically driven on its own, rather than by a centralized power station. In this way, the freedom of a single trolley is greater, and can transport materials in both directions. Due to the absence of centralized power station and traction chain tension constraints, flexible modular monorail transmission line is not limited by the length. If the standard track and the quick joint are docked, the untransportable materials can be transferred between two flexible combined monorails in different places. The flexible modular monorail conveyor trolley deliver capacity can up to 2000Kg.

KBK-LD type flexible modular single girder suspension crane

KBK-LD type flexible modular single girder suspension crane is composed of standard linear track and other auxiliary standard parts. The trolley travelling part at both ends of the main beam can be run on two tracks perpendicular to the direction of the main beam, the single beam can be used with each type of fixed chain hoist, the special KBK driving device can drive the hoist to run along the direction of the main beam. This kind of product is used for plane material transportation and can be used in workshop or warehouse. Due to its special flexibility and degree of freedom, the flexible modular single-beam suspension crane can be inclined to run on the track, it can also walk on the track with variable span, and it can also run on two concentric circular curved tracks which is not possible for other kinds of lifting products. The maximum span of flexible composite single-beam suspension crane is 10 meters and the maximum lifting capacity is 2500Kg.

KBK-LS type flexible modular double girder suspension crane

KBK-LS type flexible modular double girder suspension crane is composed of standard linear track and other auxiliary standard parts. The trolley travelling part at both ends of the main beam can be run on two tracks perpendicular to the direction of the main beam, the single beam can be used with each type of fixed chain hoist, the special KBK driving device can drive the hoist to run along the direction of the main beam. This kind of product is used for plane material transportation and can be used in workshop or warehouse. The flexible modular double girder suspension crane is used to lift heavy materials with large span due to the use of double-rail parallel composite beam to increase the load-bearing capacity of the main beam.

KBK Rigid Truss Conveying Crane

Freestanding Workstation Overhead Cranes

Independently installed on the ground, without the need for additional support, according to production needs can be expanded load up to 2000 Kg, span up to more than 10 meters, can be installed trolley, modular design has strong expansion. Rigid connection, easy manual operation. Special guide wheel to ensure the movement of no stay, no shaking, no stuck phenomenon, accurate positioning, reduce labor intensity.

The self-supporting rigid truss light load conveying system does not need the cow-leg of the workshop, and can be installed independently on the workshop floor, and can be expanded or reduced according to the production demand at any time, with great flexibility and low cost.

Rigid truss conveying system's track advantages

  • Closed type track design: can effectively avoid dust, so as to reduce the trolley wheel wear and prolong service life.
  • 2° inclined plane track design: It can effectively ensure that the trolley is located in the center of the track and reduce the sliding resistance to the maximum extent.
  • The track is formed by single cold rolling, no welding, high strength.
  • Light dead weight, effectively reduce the pressure on the structure support.
  • Multi-series track selection, you can choose the most suitable products, to minimize waste, save costs.

Why Choose Yuantai Crane?

Give you multiple returns

Yuantai's crane products have currently served more than 150 countries around the world, and have created wealth for customers that is several times the price of the crane machine, and it is still going on.

Professional, worry-free and time-saving

Professional and customized crane solutions can better match customers' working conditions. High-quality crane products make customers more assured and worry-free when use.

Product life cycle service

Our services run through all aspects of product design, production, installation and spare parts support. Taking customers as the center and taking high-quality products as the core carrier, realize the service concept of customers buying with confidence and using them with confidence.

How to get quotation?

Overhead & Gantry Crane

  • Lifting capacity:
  • Lifting height:
  • Span:
  • Voltage(e.g. 220V 60Hz 3Phase):
  • Working conditions:

Jib Crane Inquiry

  • Lifting capacity:
  • Lifting height:
  • Arm length:
  • Voltage(e.g. 220V 60Hz 3Phase):
  • Working conditions:

Hoist Inquiry

  • Lifting capacity:
  • Lifting height:
  • Voltage(e.g. 220V 60Hz 3Phase):
  • Working conditions:

Send us your RFQ including the parameters above, we will reply our quotation accordingly.